VDMA members’ equipment at forefront of mask production

Posted July 23, 2020

 

FRANKFURT, Germany – Protective masks, everyday masks, disinfecting wipes and surgical gowns are goods in demand in times of the coronavirus, of course. In their manufacture, textile machines are at the beginning of the production chain.

 

The production of the textile raw material is the first step of the usually multi-stage production processes. Members of the Germany-based VDMA Textile Machinery Association are at the beginning of this technological chain.

 

The production of protective masks starts with the manufacture of the filter material, which for surgical masks as well as FFP2 and FFP3 respirator masks consists of fine-pored nonwoven fabric to intercept coronaviruses. In addition to the systems, machines and components used for this purpose, measurement and control technology ensures the highest quality of important parameters such as basis weight and air permeability. Nonwovens used for respiratory masks have to meet the same high-quality requirements as the masks – to ensure the protection of the mask wearer.

 

Members of the VDMA Textile Machinery Association have reacted to the new market requirements in a very short time and developed new technologies for knitted, warp knitted as well as woven mouth and nose masks that can be produced without the need for sewing. For surgical masks, FFP2 respirators and social distancing masks, a wide variety of other materials and combinations of materials are used (nonwovens, woven fabrics, knitted or warp knitted fabrics and laminates thereof). Elastic bands are required to wear the masks and several association members provide technologies for their production. 

 

Materials for masks can be treated with textile chemicals to make them antiviral and antibacterial. For this purpose, the VDMA member companies offer application systems which apply the corresponding chemicals to fabric webs. As already mentioned, quality assurance is extremely important for medical products. For this purpose, member companies of the VDMA offer software systems with which each mask can be traced through the entire production process.

 

VDMA members also offer solutions for the assembly of respirator masks, some of which were developed at short notice. These solutions enable respirators to be produced that meet the relevant standards and the highest quality requirements of customers and market surveillance. This applies to systems for the production of surgical masks and FFP respirators. At the end of the production chain, machines are used to pack masks in single or multiple packs.

 

In pandemic times, the demand for protective gowns (so-called surgical gowns) also increases. The same applies to disinfecting wipes. For these textile products, too, VDMA members manufacture tailor-made machines for production through to packaging. The quality of the products is ensured by means of measurement and control technology. 

 

An Internet article at http://www.machines-for-textiles.com provides detailed information on process steps and the range of services offered by the members of VDMA Textile Machinery. The overview is continuously updated. For research purposes, the manufacturers' directory at http://www.machines-for-textiles.com is also available, as are the industry experts by sending an enquiry to txm@vdma.org.

 

In the wake of the coronavirus crisis, VDMA Textile Machinery has launched a new series of web events called "Textile Machinery Webtalk." Here, experts from up to four VDMA member companies presented their innovative technologies on a specific topic in a maximum of 90 minutes and are available to answer questions from participants. The presentations are held in English.

 

Participation in the web events is free of charge.

 

Topics of the first three web talks were:
 

  • Technologies for the production of melt-blown nonwovens for respiratory protection masks (FFP masks and surgical masks)

  • Technologies for the production of respiratory protection masks (FFP masks and surgical masks)

  • Technology solutions to produce fully-fashioned community face masks (which took place today, July 23)

 

Around 180 people from more than 30 countries took part in the first two web talks. With this format, the VDMA reaches both textile and nonwovens manufacturers who already manufacture these products and companies that want to invest in new business areas. 

 

Source: VDMA

STA_ad_011520-optimized_compressed.gif
ATMA_Techtextil 2020 ad_website_011520-o
AB_Carter_AD_2019_New_Logo_032419-Optimi
Murata_eTC_Ad_111619_FINAL.gif
Frankl-Thomas-sidebar-ad-080117_256_opti
PAF-Sales-230X124-NEW-052814_256.gif
SSM_eTextileCommunication_Banner_230x124
Mezger-sidebar-ad-230X124-062816-Draft2_
Zimmer_ad_inside_920X496.jpg
Banner_WeavingTechnical_ETC_230x124.gif
Navis-TubeTex-Web-Inside-Page-090518_opt
  • LinkedIn
  • Wix Facebook page
  • Instagram
  • Wix Twitter page
ETC_banner
  • Twitter Clean

Follow us on Twitter

​Follow us on facebook

Watch adoptable animals on YouTube

© 2020 by eTextileCommunications.com